APC APDU9959EU3 Switched Rack PDU, 16A 230V, IEC309 Cord
A ZeroU switched rack PDU from APC’s 9000 Switched series, built for a 16A, 230V circuit, with an IEC309 input cord, 21 C13 outlets and 3 C19 outlets.
Original price was: 5,750.92 SAR.5,405.86 SARCurrent price is: 5,405.86 SAR. excl. VAT
Available on backorder
RISYS can programme and prepare devices before delivery. Contact us for quantity and project details.
Wholesale and project supply — up to 45% off











Up to 45% off wholesale supply.
Overview
The APC APDU9959EU3 brings the full outlet count of APC’s 9000 Switched layout to a circuit most buildings already have. It is rated 16A at 230V and is supplied with an IEC309 input cord, the industrial plug and socket system commonly used for dedicated equipment circuits. That pairing lets a facility put a switched PDU with 21 C13 outlets and 3 C19 outlets into a cabinet without commissioning a heavy-current feed. The unit mounts ZeroU, vertically in the rear channel of the rack, so none of the cabinet’s rack units are given up for power. For a network or security cabinet whose load is moderate but whose device count is high, with many switches, recorders, controllers and appliances each on its own power cord, this is the member of the family that matches socket count to an ordinary circuit.
What the APC APDU9959EU3 does day to day
Many cabinets run out of sockets long before they run out of power. An access switch stack, several NVRs, a firewall, a router, a KVM switch and a pair of small servers can need well over ten outlets while drawing a modest total. The APDU9959EU3 answers that case: its 21 C13 outlets cover the standard power cords of most IT and security equipment, and its 3 C19 outlets take the larger cords of storage shelves or high-output PoE switches.
Being a Switched unit, it lets an administrator turn individual outlets on and off remotely. In practice this is how a locked-up camera recorder or access controller is power-cycled from the operations office, and how unused outlets are kept off so that nothing plugged in without the team’s knowledge receives power.
Why the IEC309 cord matters
An IEC309 plug seats firmly in a matching industrial socket, which the electrical contractor installs on a circuit dedicated to the cabinet. This keeps the rack’s power separate from general-purpose wall sockets that cleaners or other trades might use, and the sturdy connector is far less likely to be knocked loose than a domestic plug. When planning the room’s electrical works, specify a matching IEC309 socket on a 16A, 230V circuit.
Saudi deployment scenarios
Typical homes for the APDU9959EU3 are communications cabinets in bank branches, school and university buildings, clinics, hotel floors and retail chains, along with the security rooms of residential compounds, warehouses and logistics yards. These rooms usually have a dedicated 16A, 230V circuit available or can be given one easily. The security cabinet in particular tends to hold many small devices, such as PoE switches, recorders, access-control panels and alarm interfaces, that use up sockets quickly.
APDU9959EU3 versus the rest of the family
The APDU9953 keeps the same 21 C13 and 3 C19 outlet set in the 9000 Switched series but is rated 32A at 230V, which is the step to take when the cabinet’s load is genuinely heavy, as in dense server or storage racks. The APDU9959NA3 is rated 20A at 208V for rooms wired to that voltage. Choose the APDU9959EU3 when the outlet count is the constraint and the total load sits comfortably within a 16A, 230V circuit.
Before you install
Check that the cabinet’s rear channel has a free vertical mounting position for a ZeroU unit and that the cord can reach the IEC309 socket without strain. Add up the nameplate draw of the connected devices and keep it within the 16A rating instead of judging capacity by free outlets. Reserve the C19 outlets for the devices whose cords actually need them, and label each outlet so that remote switching acts on the right device.
Package Contents
- Installation guide
- Locking input power cord
- Rack mounting brackets
- Safety guide
Technical Specifications
- Brand
- APC
- Model
- APDU9959EU3
- Mounting
- ZeroU
- Ports
- 24
Frequently Asked Questions
What plug does the APC APDU9959EU3 use?
It is supplied with an IEC309 input cord, so the circuit feeding it needs a matching IEC309 socket.
What circuit does the APDU9959EU3 need?
It is rated 16A at 230V, so a dedicated circuit of that current and voltage is sufficient.
How many outlets does it have?
It has 21 C13 outlets and 3 C19 outlets.
Does it use rack units?
No. It is a ZeroU unit that mounts vertically in the rear channel of the rack.
When is the APDU9953 the better choice?
When the cabinet's load exceeds what a 16A circuit can carry. The APDU9953 is rated 32A at 230V with the same outlet layout.

APC UPS systems keep servers and network cabinets running through outages and unstable mains, and the wider APC range extends into the racks, power distribution and sensors around them. APC began in the United States as American Power Conversion and
Browse brand productsDelivery across Saudi Arabia
Clear warranty
Some devices or frequencies may require a permit or approval depending on the intended use and the regulations in force in the Kingdom. Requirements are clarified before project orders are fulfilled.
Customer Reviews
No ratings yet for this product
Only logged in customers who have purchased this product may leave a review.
Related Products
APC AP4424A Rack Transfer Switch 2U 32A, 18 Outlets
On backorder
APC AP7920B Switched Rack PDU, 1U, 8 C13 Outlets, C14 Input
On backorder
APC AP7820B Metered Rack PDU, 1U, 8 x C13 Outlets
On backorder
APC AP7921B Switched Rack PDU, 16 A, 1U, 8 C13 Outlets
On backorder





Reviews
There are no reviews yet.