APC EPDU1116B Basic Rack PDU, 0U Vertical, 20 C13 and 4 C19
A 0U vertical basic rack PDU with 20 IEC 60320 C13 and 4 IEC 60320 C19 outlets on a single IEC 60309 16 A cord, for full-height racks that need outlet density rather than metering.
Original price was: 1,165.19 SAR.1,095.28 SARCurrent price is: 1,095.28 SAR. excl. VAT
Available on backorder
RISYS can programme and prepare devices before delivery. Contact us for quantity and project details.
Wholesale and project supply — up to 45% off











Up to 45% off wholesale supply.
Overview
The APC EPDU1116B is a basic rack PDU that trades metering for outlet density. It mounts vertically in the side of the rack, uses 0U of rack height, and distributes a 16 A supply to 20 IEC 60320 C13 and 4 IEC 60320 C19 outlets. In APC’s rack power family it covers the ground between compact horizontal strips and the metered vertical units: the same full-height vertical reach as the EPDU1116M, at the simpler basic tier, for racks whose load has already been planned. Input arrives on a single cord with an IEC 60309 16 A 2P + E plug, accepting 200 V, 208 V or 230 V at 50/60 Hz, and the outlets deliver 230 V. Load capacity is rated at 3680 VA and the cord length is 2.99 m. If the question for a rack is how to reach every device without chaining strips together, rather than how to watch the load, this is the unit that answers it.
The APC EPDU1116B in the rack: what changes day to day
Outlets next to the equipment
A vertical strip runs alongside the equipment instead of taking a row of the rack, so each server or switch plugs into an outlet close to its own height. Power cords stay short, the rear of the rack stays tidier, and every unit of rack height remains available for equipment. In a densely populated server rack, that alone shortens installation time and makes any cord easy to trace during maintenance.
Two outlet types for two kinds of load
The 20 IEC 60320 C13 outlets serve the bulk of rack equipment: switches, routers, firewalls, standard servers, recorders and storage shelves. The 4 IEC 60320 C19 outlets take the higher-current cords used by larger servers and storage arrays. Having both on one strip avoids fitting a second unit just to power two or three heavier devices.
Basic means less to manage
There is no metering and nothing to configure: the strip simply passes power from its input to its outlets. For a contractor handing over a project, that means no settings to document or keep updated. The trade-off is that the load must be calculated at design stage and held below 3680 VA, because the strip will not show how close it is getting.
Where the APC EPDU1116B fits in Saudi projects
Data centres and server rooms at ministries, universities and hospitals in Riyadh, Jeddah and the Eastern Province often standardise their racks and fix the loads at design stage. In those environments the EPDU1116B delivers the most outlets per rack without the cost of metering, and it can be repeated across a whole row of racks to the same specification.
Large surveillance projects such as malls, airports and stadiums typically concentrate many recorders, switches and storage servers in central recording racks. Here the C13 outlets take the recorders and switches, the C19 outlets take the larger storage servers, and all of it runs from one strip on each side of the rack.
Telecom operators, internet providers and points of presence in industrial cities, where equipment is installed to a fixed layout and rarely changes, are well served by a basic strip. The rated relative humidity range of 5 to 95 % is useful in telecom rooms in coastal cities where humidity can climb.
EPDU1116B compared with the EPDU1116M and EPDU1016M
The EPDU1116M shares the vertical format and the industrial plug type, but adds metering and gives up a few outlets in exchange. Choose it when the load will change over time and someone needs to see how close it is to the limit.
The EPDU1016M is a compact horizontal metered unit with far fewer outlets, intended for small cabinets. It does not compete with this strip on a full server rack; it serves branch and surveillance cabinets instead.
The EPDU1116B remains the choice when the rack is full height, the load is known and stable, and the requirement is the largest number of outlets from the simplest possible unit.
Installation and power planning
The strip needs an IEC 60309 16 A 2P + E socket at the rack position, so the room’s electrical works must include that socket type at 200 V, 208 V or 230 V and 50/60 Hz. The cord is 2.99 m long, so place the socket within reach without strain on the cord or extra extension leads.
The unit mounts vertically at the side of the rack and ships with a toolless mounting kit and vertical mounting brackets, so confirm the rack has enough side space for a strip of this length. Because there is no metering, add up the nameplate ratings of the connected equipment before plugging in, keep the total under 3680 VA with headroom for future additions, and follow the installation guide included in the box.
Package Contents
- Installation guide
- Toolless mounting kit
- Vertical mounting brackets
Technical Specifications
- Brand
- APC
- Warranty
- 1 Year
- Model
- EPDU1116B
- Mounting
- RACK-MOUNTED
Frequently Asked Questions
How many outlets does the APC EPDU1116B have?
It has 20 IEC 60320 C13 and 4 IEC 60320 C19 outlets, with a combined load capacity of 3680 VA.
Does it take up rack units?
No. It is a 0U vertical strip that mounts at the side of the rack, and it ships with a toolless mounting kit and vertical mounting brackets.
What socket does it need?
It connects through a single 2.99 m cord with an IEC 60309 16 A 2P + E plug and accepts 200 V, 208 V or 230 V at 50/60 Hz.
Does it meter the load?
No. It is a basic PDU that only distributes power. If you need metering in the same vertical format, look at the EPDU1116M.

APC UPS systems keep servers and network cabinets running through outages and unstable mains, and the wider APC range extends into the racks, power distribution and sensors around them. APC began in the United States as American Power Conversion and
Browse brand productsDelivery across Saudi Arabia
Clear warranty
Some devices or frequencies may require a permit or approval depending on the intended use and the regulations in force in the Kingdom. Requirements are clarified before project orders are fulfilled.
Customer Reviews
No ratings yet for this product
Only logged in customers who have purchased this product may leave a review.
Related Products
APC AP4421A Rack Automatic Transfer Switch 1U 10A
On backorder
APC AP6032A Rack PDU, 4 C19 Outlets, 32A IEC 60309 Input
On backorder
APC AP7821B Metered Rack PDU, 16A, 1U, 8 x C13
On backorder
APC APDU9953 Switched Rack PDU, 32A 230V, 21 C13 + 3 C19
On backorder





Reviews
There are no reviews yet.