APC APCRBC113 UPS Replacement Battery Cartridge 24V 7.0Ah
A lead-acid replacement battery cartridge from APC rated 12 V, 7.0 Ah (7000 mAh) with a 24 V output, covered by a 2-year warranty.
Original price was: 290.83 SAR.273.38 SARCurrent price is: 273.38 SAR. excl. VAT
Available on backorder
RISYS can programme and prepare devices before delivery. Contact us for quantity and project details.
Wholesale and project supply — up to 45% off











Up to 45% off wholesale supply.
Overview
The APC APCRBC113 is a lead-acid replacement battery cartridge whose distinguishing figure is its power rating: 12 V, 7.0 Ah, equivalent to 7000 mAh, with a 24 V output to the UPS it serves. Within the APC UPS battery range, cartridges are separated mainly by voltage and amp-hour rating, and that pairing decides whether a cartridge belongs in a given unit. For a facilities or IT manager, the APCRBC113 is the part to order when it is the listed replacement for a UPS whose original batteries no longer hold a charge long enough to cover a power cut. Replacing the cartridge restores backup capacity without replacing the UPS itself, its mounting or its wiring. It ships with the connectors it needs, an installation guide and a battery recycling guide, and it carries a 2-year warranty.
What the APC APCRBC113 does in practice
A UPS is only as useful as the battery behind it. When mains power drops, the UPS switches its load to the battery, and the condition of that battery decides how long the connected equipment stays on. Lead-acid batteries lose capacity gradually, so a UPS that once carried a network cabinet through a short outage may start shutting down within moments of the power going off. The APCRBC113 returns that unit to its intended reserve with a fresh lead-acid cartridge delivering 24 V. Because the cartridge arrives as a prepared assembly together with its connectors, the job is a swap rather than a rebuild, which keeps the downtime of the protected equipment short.
Where it fits on Saudi sites
UPS units built around a low-voltage battery like this one usually protect equipment close to the user: a point-of-sale terminal in a retail branch, a router and switch in an office, an access-control panel at a staff entrance, or a network video recorder in a clinic or warehouse. Summer load peaks and maintenance work on building supplies make brief interruptions routine in many Saudi facilities, and a tired battery turns each of them into a reboot, a lost transaction or a gap in recorded footage. Facilities teams that look after many identical UPS units across branches can standardise on the APCRBC113 for every unit that lists it, which simplifies spares planning and keeps replacement cycles predictable.
APCRBC113 compared with its siblings
The closest sibling is the APCRBC118, which APC lists at 12 V, 5.0 Ah. The two share a voltage figure but differ in amp-hour rating, and a different rating means a different cartridge, so the model printed on the UPS label or in its manual is the one to order. Further up the range, the RBC55 is listed at 12VDC, 17Ah and the RBC7 at 17Ah, 12VDC, both with much larger amp-hour ratings. The RBC48, listed at 24V 7Ah, carries similar headline figures but is a separate model number, so the model named on the UPS, not the voltage and capacity figures alone, settles the order.
Deployment notes
Before ordering, read the replacement battery model from the UPS label or its manual and confirm it reads APCRBC113. Plan the swap for a quiet period, shut down or transfer the protected load if your UPS model does not support replacing the battery while running, and follow the included installation guide for the connection sequence. Use the supplied connectors rather than improvised ones. Once the new cartridge is in place, let it charge fully before relying on it, then run the UPS self-test if your model offers one. The old lead-acid battery should never go into general waste: the battery recycling guide in the box explains how to handle it.
Package Contents
- Required connectors
- Battery recycling guide
- Installation guide
- Reusable packaging
Technical Specifications
- Brand
- APC
- Warranty
- 2 Years
- Battery Details
- Lead-acid
- Model
- APCRBC113
- Power
- 12 V, 7.0 Ah
Frequently Asked Questions
What is the power rating of the APC APCRBC113?
It is rated 12 V, 7.0 Ah, which equals 7000 mAh, and it supplies a 24 V output to the UPS.
What battery chemistry does the APCRBC113 use?
Lead-acid. Like any lead-acid battery it loses capacity with age, which is why UPS batteries are replaced as a planned maintenance task.
What comes in the box?
The required connectors, a battery recycling guide, an installation guide and reusable packaging.
What warranty covers the APCRBC113?
The cartridge carries a 2-year warranty.

APC UPS systems keep servers and network cabinets running through outages and unstable mains, and the wider APC range extends into the racks, power distribution and sensors around them. APC began in the United States as American Power Conversion and
Browse brand productsDelivery across Saudi Arabia
Clear warranty
Some devices or frequencies may require a permit or approval depending on the intended use and the regulations in force in the Kingdom. Requirements are clarified before project orders are fulfilled.
Customer Reviews
No ratings yet for this product
Only logged in customers who have purchased this product may leave a review.
Related Products
APC SRV1KI Online Tower UPS 1000 VA
On backorder
APC BVX700LUI UPS with IEC Sockets
On backorder
APC SRVL2KRILRK Lithium-ion UPS 2000 VA
On backorder
APC SMV1000I Line Interactive UPS 1000 VA
On backorder





Reviews
There are no reviews yet.