Wholesale & retail - B2B/B2C
Free site survey in Riyadh
Shipping across the Kingdom
Warranty on all products
BrandAPC

APC PDM3532IEC-320 Three-Phase Power Module, 32 A, 320 cm

An APC power distribution module with a 320 cm output cable that delivers a protected 400 V three-phase, 32 A branch to one rack through a single IEC 309 32 A connector.

ModelPDM3532IEC-320

Original price was: 2,785.45 SAR.Current price is: 2,618.32 SAR. excl. VAT

Available on backorder

WhatsApp Inquiry

RISYS can programme and prepare devices before delivery. Contact us for quantity and project details.

Wholesale and project supply — up to 45% off

Minimum order5 units

Shipping and delivery icon
Fast shipping
SMSA Express logoFedEx logoNAQEL Express logoDHL logo
Product warranty icon
Genuine warranty
All products carry a one-year authorised-agent warranty.
Secure payment icon
Secure payment
madaVisaMastercardApple Pay
B2B sales icon
B2B/B2C supply

Up to 45% off wholesale supply.

Overview

Rack rows rarely end at the distribution point. The second or third position in a row, or a rack across a narrow aisle, needs a feed that travels a little further than the closest unit, and the APC PDM3532IEC-320 is built for that middle distance. It carries a 400 V three-phase supply over a 320 cm output cable to one IEC 309 32 A connector, with a 32A breaker guarding the branch. Between the PDM3532IEC-260 and the PDM3532IEC-380 it sits squarely in the centre: more reach than the first, less cable to manage than the second. That balance is the reason to choose it when the measured route falls between the two, so the rack receives a protected 32 A feed without either a stretched cable or a large surplus loop behind the cabinet.

Inside the APC PDM3532IEC-320

Supply and output

The module’s input is 400 V three-phase at 50 Hz. On the output side it is listed at 230 V and 400 V three-phase, which is how a low-voltage three-phase system presents itself to a load: 400 V measured between phases and 230 V from any phase to neutral. A rack PDU designed for a three-phase input takes the feed as it arrives and can spread its outlets across the phases to keep the load balanced.

Protection and current limit

Maximum line current and maximum current draw are both 32 A, and the built-in breaker is rated 32A to match. The breaker marks the boundary of the branch: when the connected rack draws more than the module is rated for, it opens before the cable or connector is pushed beyond its rating. Sizing the rack load below that figure rather than at it keeps nuisance trips away when every server in the rack powers up together after an outage.

Connector

The single outlet is an IEC 309 32 A connector, part of the industrial pin-and-sleeve family used where a plug must carry heavy current and stay seated. With one outlet, each PDM3532IEC-320 serves exactly one rack PDU, which gives every rack its own breaker and its own point of isolation.

Saudi deployments that suit a 320 cm feed

Cloud and colocation halls in Riyadh and the Eastern Province often place their three-phase distribution at the end of a row and populate outward, and the PDM3532IEC-320 suits the positions just beyond the first rack. Healthcare networks consolidating PACS and hospital information systems into central server rooms, universities running research computing clusters, and ministries moving workloads into their own data centres meet the same geometry when rooms are fitted out in phases. In telecom exchanges, where equipment racks often stand back from wall-mounted distribution, the extra reach over the PDM3532IEC-260 can save moving either the rack or the distribution point.

PDM3532IEC-320 compared with the rest of the family

Against its two closest siblings the choice is purely about route length, because the electrical profile is the same: 400 V three-phase in, 32 A, and an IEC 309 32 A connector out. Pick the PDM3532IEC-260 when the rack is close enough for a shorter cable, and the PDM3532IEC-380 when the route is longer than this model can cover. The series continues with models from the PDM3532IEC-440 to the PDM3532IEC-980, which also run on a 400 V three-phase supply, so lengths can be mixed in one room without touching the upstream design. Racks whose PDU is not built for a three-phase input need a different branch of the family, so confirm the PDU inlet before ordering.

Before installation

Prepare a 400 V three-phase upstream circuit protected for 32 A, and check the site supply frequency against the module’s 50 Hz rating. Then walk the actual cable route with a tape measure: from the distribution point, along the tray or floor void, and up inside the rack to the PDU inlet. If the total sits comfortably within 320 cm with a little slack for the bend, this is the right length. Leave the IEC 309 connector where a technician can reach it to isolate the rack, and follow the supplied installation guide when fixing the module. The PDM3532IEC-320 is grey, carries CE and VDE marks, is RoHS compliant by exemption, and is covered by a 12-month warranty.

Package Contents

  • Power distribution module
  • Installation guide

Technical Specifications

Brand
APC
Warranty
1 Year
Model
PDM3532IEC-320

Frequently Asked Questions

How far can the APC PDM3532IEC-320 reach?

Its output cable is 320 cm long and ends in one IEC 309 32 A connector.

What voltage does it work with?

Its input is 400 V three-phase at 50 Hz, and its output is listed at 230 V and 400 V three-phase.

What is its current rating?

Maximum line current and maximum current draw are both 32 A, protected by a 32A breaker.

How does it differ from the PDM3532IEC-260 and PDM3532IEC-380?

The electrical rating is the same; the PDM3532IEC-260 has a shorter cable and the PDM3532IEC-380 a longer one, so choose by the measured route.

What warranty does it carry?

A 12-month warranty. The module also carries CE and VDE marks and is RoHS compliant by exemption.

Brand
APC

APC UPS systems keep servers and network cabinets running through outages and unstable mains, and the wider APC range extends into the racks, power distribution and sensors around them. APC began in the United States as American Power Conversion and

Browse brand products
Shipping, Warranty and Regulatory

Delivery across Saudi Arabia

Clear warranty

Some devices or frequencies may require a permit or approval depending on the intended use and the regulations in force in the Kingdom. Requirements are clarified before project orders are fulfilled.

Customer Reviews

No ratings yet for this product

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Related Products

APC

APC AP7822B Metered Rack PDU, 32A, 2U, C13 and C19

Model AP7822B
2 YearsRack-mounted200 V
Original price was: 3,725.60 SAR.Current price is: 3,502.06 SAR. excl. VAT Save 223.54 SAR

On backorder

Request a Quote
APC

APC APDU9953 Switched Rack PDU, 32A 230V, 21 C13 + 3 C19

Model APDU9953
ZeroU24
Original price was: 6,100.98 SAR.Current price is: 5,734.92 SAR. excl. VAT Save 366.06 SAR

On backorder

Request a Quote
APC

APC AP4423A Rack Transfer Switch 1U 16A, 3700 VA

Model AP4423A
1Uinput: 2 IEC 60320 C2...
Original price was: 5,225.84 SAR.Current price is: 4,912.29 SAR. excl. VAT Save 313.55 SAR

On backorder

Request a Quote
APC

APC AP6120A Rack PDU, 7 C13 + 2 C19 Outlets, 20A Input

Model AP6120A
240V
Original price was: 450.07 SAR.Current price is: 423.07 SAR. excl. VAT Save 27.00 SAR

On backorder

Request a Quote

Original price was: 2,785.45 SAR.Current price is: 2,618.32 SAR. excl. VAT