APC SRTL3000RMXLI-NC Smart-UPS 2.7 kW Li-Ion with NMC
A 3 kVA / 2.7 kW lithium-ion double-conversion on-line UPS with pure sine wave output, a preinstalled Network Management Card 3 and rack/tower convertible 3U chassis.
Original price was: 21,274.46 SAR.19,997.99 SARCurrent price is: 19,997.99 SAR. excl. VAT
Available on backorder
RISYS can programme and prepare devices before delivery. Contact us for quantity and project details.
Wholesale and project supply — up to 45% off











Up to 45% off wholesale supply.
Overview
APC SRTL3000RMXLI-NC is the Smart-UPS lithium-ion model to choose when the number that decides the purchase is real power: it is rated at 2.7 kW alongside its 3 kVA apparent-power rating, so a rack drawing close to 2.7 kW of actual load still sits inside its limit. That real-power figure, rather than the headline kVA, is what IT and facilities teams compare against the summed nameplate draw of servers, storage and switches. The unit backs that rating with a double-conversion on-line design and pure sine wave output on a 230V supply, and it arrives with a Network Management Card 3 already installed, including environmental monitoring. Its chassis converts between rack and tower placement, occupying 3U when mounted in a cabinet, and the outlet panel offers six C13 and two C19 IEC sockets.
Sizing a load against the APC SRTL3000RMXLI-NC rating
Every UPS has two ceilings, and the one reached first in practice is usually real power. Add the wattage printed on each device that will connect, compare the total with 2.7 kW, and keep a margin for equipment added during the life of the installation. Server power supplies with power-factor correction draw nearly as many watts as volt-amperes, which is why planning starts from 2.7 kW rather than from 3 kVA. The six C13 sockets cover the standard cords of switches, firewalls, recorders and small servers; the two C19 sockets take the heavier cords of larger servers and storage shelves, so the highest-draw devices land on the outlets built for them.
Clean power and continuous operation
In a double-conversion on-line UPS, the incoming supply is converted to DC and then rebuilt as a fresh AC output, so the connected equipment is always fed by the inverter. Sags, spikes and frequency drift on the building supply stay on the input side, and when the mains fails there is no switch-over moment because the load was already running from the inverter. The output is a pure sine wave, which matters for server power supplies with active power-factor correction and for sensitive network electronics that handle stepped waveforms poorly.
Remote management from day one
The preinstalled Network Management Card 3 puts the UPS on the network as soon as it is installed, so the team monitors and manages it over the network instead of relying on a single server connected by USB. Environmental monitoring extends that view to the conditions around the rack, an early warning in Saudi equipment rooms where a cooling failure during summer quickly becomes a heat problem. The USB cable and communication cable in the box remain available for local configuration.
Saudi sites that need this rating
The combination of 2.7 kW, network access and rack or tower placement fits sites managed by a central team rather than by someone on the spot: data rooms in government and semi-government branches, the server rack of a hospital department, network distribution rooms on university campuses, control rooms at industrial plants in Jubail or Yanbu, and the head-end rack of a large CCTV deployment in a mall or residential compound. Where no cabinet is available, the tower option lets the same unit stand on the floor of a smaller office or retail branch on the removable support feet supplied.
How it compares with SRTL3000RMXLI and SRTL3KRM1UIC
SRTL3000RMXLI shares the 3 kVA class, the lithium-ion battery and the same outlet layout, and is managed over USB from a host in the same rack, which suits a single-cabinet site. SRTL3KRM1UIC moves the 3000 VA class into 1U of rack height with SmartConnect, for cabinets where every unit of height counts. SRTL3000RMXLI-NC is the model to specify once the real-power rating has been checked against the load and the UPS must be visible on the network.
Deployment notes
Decide on rack or tower placement before installation day. In a cabinet, reserve 3U low in the rack and mount the unit on the supplied rail kit; on the floor, fit the removable support feet and leave clearance at the front and rear for airflow. Confirm that the feeding circuit is 230V and sized for a 3 kVA load. Connect the network management card to the management network and assign its address before the protected servers go live, then plan which servers shut down first during a long outage. Plug the heaviest devices into the C19 outlets and spread the remaining load across the C13 sockets.
Package Contents
- CD with software
- Communication cable
- Documentation CD
- Installation guide
- Removable support feet
- USB cable
- Warranty card
- UPS
- Rail kit
Technical Specifications
- Brand
- APC
- Battery Details
- lithium-ion
- Model
- SRTL3000RMXLI-NC
- Mounting
- rack/tower convertible; rackmount 3U
- Power
- 2.7kW
- Ups Power
- 3kVA
Frequently Asked Questions
What load can APC SRTL3000RMXLI-NC carry?
It is rated at 3 kVA and 2.7 kW. Keep the combined real power of the connected equipment below 2.7 kW, with a margin for equipment added later.
Is a network management card included?
Yes. A Network Management Card 3 with environmental monitoring comes preinstalled, so the UPS can be managed over the network from the first day.
Can it stand on the floor instead of in a rack?
Yes. The chassis converts between rack and tower placement. In a cabinet it occupies 3U on the supplied rail kit, and the removable support feet in the box are used for floor placement.
What kind of output does it deliver?
It is a double-conversion on-line UPS with pure sine wave output on a 230V supply, delivered through six C13 and two C19 IEC outlets.

APC UPS systems keep servers and network cabinets running through outages and unstable mains, and the wider APC range extends into the racks, power distribution and sensors around them. APC began in the United States as American Power Conversion and
Browse brand productsDelivery across Saudi Arabia
Clear warranty
Some devices or frequencies may require a permit or approval depending on the intended use and the regulations in force in the Kingdom. Requirements are clarified before project orders are fulfilled.
Customer Reviews
No ratings yet for this product
Only logged in customers who have purchased this product may leave a review.
Related Products
APC SMTL750RMI2UC Lithium-ion Smart-UPS 600W 2U Rack
On backorder
APC SRV6KIL Tower UPS 6 kVA External Battery
On backorder
APC SRV15KRILRK Online Rack UPS 15 kVA
On backorder
APC BVX2200LI Tower UPS 2200 VA
On backorder





Reviews
There are no reviews yet.