APC SRV2KRIRK Online Rackmount UPS 1600 W 2U
A 2U online rackmount UPS rated at 1600 W and 2000 VA, operating at 230 V. Four IEC C13 outlets, an LCD and an intelligent card slot make rack layout and connection planning central to selection.
Original price was: 3,429.65 SAR.3,223.87 SARCurrent price is: 3,223.87 SAR. excl. VAT
Available on backorder
RISYS can programme and prepare devices before delivery. Contact us for quantity and project details.
Wholesale and project supply — up to 45% off











Up to 45% off wholesale supply.
Overview
The APC SRV2KRIRK brings a 1600 W active power rating and 2000 VA apparent power rating to an online rackmount UPS occupying 2U of rack height. It is a relevant option when the site team wants the UPS installed with the equipment inside the rack. Its 230 V arrangement includes four IEC C13 output connections, an LCD and an intelligent card slot. For a Saudi branch equipment room or facilities installation, the selection starts with a combined review of rack space, connected loads and cable routes. This keeps the buying decision tied to the actual equipment layout and gives the installation team a specific location and connection plan to work towards.
APC SRV2KRIRK in the rack layout
Allocate the required 2U position before equipment reaches the site. Review the 2U mounting position and support arrangement with the installer, then map power cable routes so that the UPS can be attended without disturbing neighbouring equipment. The LCD provides a local interface, making display access part of the layout decision. A position that is convenient for installation should also remain practical for the staff who carry out routine checks and take over responsibility after project handover.
Matching loads to output connections
Assess active power demand against 1600 W and apparent power demand against 2000 VA. Record the intended equipment and review the 1600 W and 2000 VA limits when confirming the load arrangement. Four IEC C13 outlets provide defined connection points for suitable equipment cables. Verify the 230 V requirements and the complete cable connection for each intended device. Keep later additions subject to the same review: a free outlet is a connection opportunity, while suitability still depends on the electrical requirements of the proposed load.
Planning management and local access
The intelligent card slot belongs in the technical team’s management planning. Establish the management arrangement for the intelligent card slot and check any proposed card against the unit before approving an accessory. For staff attending the rack, the LCD remains the local interface. Identify who will check the UPS and keep its model and rack position clear in the handover documentation. These steps give both site operations and the technical team an agreed point of reference when reviewing changes to the installation.
A different deployment choice from tower models
Compare SRV2KRIRK with SMV2000AI-MSX and SMV3000AI through the installation layout first. Those tower models address a different physical arrangement, while this unit is specified for rack mounting. An office with equipment distributed around desks calls for a different placement discussion from a room built around an equipment rack. Choose the format that fits the intended location, then review load and connections. A shared family name does not make the surrounding installation work interchangeable.
Use in branch equipment rooms
A branch IT or facilities team can assess this configuration for compatible equipment grouped in a rack. Start by identifying the operational devices requiring backup rather than assuming every item in the room must share the UPS. Give the installer an equipment schedule, outlet allocation and an agreed mounting location. This turns the specification into an installation that can be inspected, handed over and maintained against a known arrangement, with both electrical demand and physical access considered.
After deployment, retain the device schedule and connection map with site operating documents. Revisit them when a device is replaced or the rack layout changes. Any future card selection should follow the technical team’s management requirements, while the LCD should remain accessible for local attention. These practices keep the SRV2KRIRK’s 1600 W capacity, connection points and rack position linked to the equipment it serves, helping the operations manager assess changes before they become unplanned additions to the power arrangement.
Package Contents
- C13 to Schuko cable
- C13 to C14 cable
- USB cable
- RS-232 configuration cable
- Rack mounting bracket
- Rack support rail
- User manual
- CD with software
Technical Specifications
- Brand
- APC
- Display
- LCD
- Model
- SRV2KRIRK
- Mounting
- rackmount 2U
- Power
- 1600W
- Ups Power
- 2000VA
Frequently Asked Questions
How much rack height does it occupy?
The mounting format is rackmount 2U. Review the mounting position and support arrangement during rack preparation.
What are the power ratings and voltage?
It is rated at 1600 W and 2000 VA, with a voltage of 230 V.
What output connections are fitted?
It has four IEC C13 output connections for suitable equipment cables within the planned load.
What local interface and card provision does it have?
It has an LCD and an intelligent card slot. Check any proposed card against the unit before selection.

APC UPS systems keep servers and network cabinets running through outages and unstable mains, and the wider APC range extends into the racks, power distribution and sensors around them. APC began in the United States as American Power Conversion and
Browse brand productsDelivery across Saudi Arabia
Clear warranty
Some devices or frequencies may require a permit or approval depending on the intended use and the regulations in force in the Kingdom. Requirements are clarified before project orders are fulfilled.
Customer Reviews
No ratings yet for this product
Only logged in customers who have purchased this product may leave a review.
Related Products
APC SMV1000I Line Interactive UPS 1000 VA
On backorder
APC BVX700LUI UPS with IEC Sockets
On backorder
APC SCL500RMI1UC Lithium-Ion 400W 1U Rackmount UPS
On backorder
APC SMV2000AI Line Interactive UPS with IEC Outlets
On backorder





Reviews
There are no reviews yet.