Grandstream GWN7702P 16-Port Unmanaged PoE Switch

Grandstream GWN7702P is aimed at sites that need straightforward wired expansion and a defined group of powered connections in one unmanaged switch. It provides 16 RJ45 ports at 10/100/1000 Mbps, while ports 1-8 support IEEE 802.3af/at PoE at up to 30 W per port within a 138 W total PoE budget. This arrangement lets an operations team place powered network endpoints on one port group and retain the remaining connections for data-only equipment. Desktop and rack-mount placement also gives the installer a practical choice between a local distribution point and an organized communications rack. The result is a clear fit for buyers who value direct deployment, Gigabit connectivity, and planned PoE capacity.

Where Grandstream GWN7702P fits in the network

The operational role of this model is easy to define: it expands the wired edge without requiring switch management. All 16 RJ45 connections support 10/100/1000 Mbps, so the port layout can accommodate connected equipment operating at the available Ethernet rates. Because the switch is unmanaged, deployment centers on cabling, port allocation, and power planning rather than configuring policies inside the unit. A buyer should map powered endpoints to ports 1-8 and reserve the other ports for devices that need a network link only. That distinction makes the product particularly useful when a site needs more total wired connections than powered connections.

PoE support follows IEEE 802.3af/at on ports 1-8, with up to 30 W available per port and 138 W available across the PoE budget. The total budget matters as much as the per-port ceiling. During planning, the installer should review the power request of each intended endpoint and keep their combined demand inside the available budget. This is relevant when the connection plan includes a mixture of PoE access points, network phones, or IP cameras, since different endpoints can request different power levels. Carrying power and data over the network cable can reduce the need for a nearby outlet at each endpoint, while still requiring deliberate power allocation.

Practical use across Saudi facilities

In an office or administrative branch, the powered ports can serve compatible network endpoints while the remaining ports connect computers, printers, or other wired equipment according to the site design. A retail or hospitality location can use the clear port split to keep powered and data-only runs easy for the maintenance team to identify. In a warehouse or operational facility, rack mounting can place the switch with the structured cabling, while desktop placement can support a smaller local distribution area. These are deployment patterns rather than automatic compatibility promises, so the endpoint standard and its requested power should be checked as part of the site plan.

A 32 Gbps switching capacity supports the unit’s role as a collection point for multiple Gigabit links. The MAC address table holds 8K entries, and Jumbo Frames are supported up to 10 KB. These specifications help a network buyer judge the traffic-handling profile expected at the access edge. They do not change the unmanaged operating model: the switch remains focused on forwarding connected traffic without a configuration workflow. That makes it appropriate where the design calls for predictable physical connectivity and PoE delivery, while any advanced network controls required by the organization are handled elsewhere in the wider architecture.

Position within the GWN7700 family

GWN7702P differs from GWN7700 because GWN7700 does not provide PoE, while the target model powers selected endpoints from the switch. GWN7700P supports IEEE 802.3af/at on ports 1-4, whereas GWN7702P extends that support across ports 1-8. GWN7701PA applies IEEE 802.3af/at to all 8 of its ports; GWN7702P combines PoE on ports 1-8 with 16 RJ45 ports in total. This makes the target model the family option to examine when the plan needs a larger pool of total connections while keeping a defined set of eight powered ports.

The comparison is useful because it prevents two common planning mismatches: buying PoE capacity for a data-only installation, or selecting fewer powered connections than the endpoint map requires. GWN7700 remains relevant to a plan with no PoE requirement. GWN7700P serves a smaller powered port group on ports 1-4. GWN7702P is the more direct match within this group when the site plan calls for PoE across ports 1-8 and 16 RJ45 connections overall. The decision should follow a physical port map and endpoint power review, rather than relying only on the expected device count.

Mounting, input power, and installation

The metal enclosure can sit on a desktop with the supplied rubber feet or be installed in a rack with the included standard rack-mounting brackets. This flexibility supports both a central communications space and a compact local installation. Power comes through an internal 100-240 V AC, 50/60 Hz input, and the power supply is rated at 150 W. Base consumption is 10.1 W at 220 V/50 Hz when PoE output is excluded. For electrical planning, the 138 W PoE allocation should therefore be understood as the budget for connected powered devices, separate from the stated base consumption of the switch itself.

The unit weighs 1.58 kg, while the packaged product weighs 2.18 kg, useful figures for rack preparation, receiving, and movement to the installation point. The package includes the GWN7702P switch, a 1.2 m AC cable, standard rack-mounting brackets, rubber feet, and a quick installation guide. The deployment team can select the mounting method, organize network runs against the planned port map, and connect powered endpoints specifically to ports 1-8. Before final operation, checking combined endpoint demand against the 138 W budget helps keep the installation aligned with the available PoE capacity.

A purchase decision tied to the port plan

Grandstream GWN7702P suits a facilities or operations buyer seeking an unmanaged switch with direct installation, 16 Gigabit RJ45 connections, and PoE assigned to a defined portion of the port bank. Its practical differentiator is the combination of a 138 W PoE budget, metal construction, and either desktop or rack placement. To decide with confidence, place each intended PoE endpoint on ports 1-8, assign data-only devices to the remaining ports, and total the endpoint requests while respecting the 30 W per-port ceiling and overall budget. That exercise shows whether the switch’s specific balance of powered and unpowered connectivity matches the site before cabling work begins.

Package Contents

• GWN7702P switch
• 1.2 m AC cable
• Standard rack-mounting brackets
• Rubber feet × 4
• Quick installation guide