Wholesale & retail - B2B/B2C
Free site survey in Riyadh
Shipping across the Kingdom
Warranty on all products
BrandZKTeco

ZKTeco DF01 Card Dual-Frequency Access Card

Combines 125 kHz ID and UHF in a hot-laminated PVC card. Reading distance is 0–6 m with UHF1-5E/UHF1-5F readers, with regional UHF band selection.

Device TypeID plus UHF cardModelDF01 Card

7.00 SAR excl. VAT

Available on backorder

WhatsApp Inquiry

RISYS can programme and prepare devices before delivery. Contact us for quantity and project details.

Wholesale and project supply — up to 45% off

Minimum order50 units

Shipping and delivery icon
Fast shipping
SMSA Express logoFedEx logoNAQEL Express logoDHL logo
Product warranty icon
Genuine warranty
All products carry a one-year authorised-agent warranty.
Secure payment icon
Secure payment
madaVisaMastercardApple Pay
B2B sales icon
B2B/B2C supply

Up to 45% off wholesale supply.

Overview

The ZKTeco DF01 combines ID and UHF technology in a card for sites that need different reading methods along an employee access route. Its practical distinction is the ability to carry both technologies in the same credential format. A facilities manager can assess it for a building entrance and a separate UHF reading point, provided the installed readers match the respective technologies. For a Saudi office complex, warehouse or operational facility, start by mapping where staff present credentials and where reading at a distance is required. That access route gives the procurement team a clear reason to specify this card and gives the installer a defined set of reader checks before deployment.

ZKTeco DF01 technology and reader matching

The ID side operates at 125 kHz, using a TK4100 chip and the ISO/EM4001 protocol. The UHF side uses an H3 (9662) chip with ISO/IEC 18000-6C. These details give the integration team specific criteria to compare against the intended readers. Match each reading point to the appropriate card technology and protocol, then test the credential through the access system used at that location. This approach ties the purchasing decision to the equipment that staff will actually encounter.

Reading distance with UHF1-5E/UHF1-5F readers is 0–6 m. Use that reader-specific range when assessing a UHF access point and arranging an on-site trial. Have the installer check card presentation along the intended approach route and confirm where a successful read occurs. The trial should represent how employees will move through the site so that the chosen reading position supports the facility’s access procedure.

Regional UHF selection

UHF bands depend on the region. Confirm the required regional band against the reader being supplied or retained before placing the order. This is especially useful for organisations sourcing equipment for several locations or incorporating readers from an earlier project. Give the purchasing team the intended reader details and require the card and reader selection to be reviewed together. The same physical card format should not replace a technology and frequency compatibility check.

Where the combined credential fits

In an administrative complex, consider the card when an employee route includes ID reading points and a separate UHF access point. In a warehouse or distribution facility, evaluate it where the access design calls for staff to use different credential technologies as they move between operational areas. The value comes from matching the combined card to those routes. Identify the users who need both technologies before choosing which staff groups should receive it.

When comparing DF01 Card with ID Thin Card and MF Thin Card, make the requirement for combined ID and UHF the starting point. DF01 Card is the option to assess when that combination is part of the access design. Have the installer compare each alternative against the readers assigned to its intended role. For the combined card, also review how the access platform associates credential identifiers with the employee and how staff will issue, replace and recover cards.

Physical format and operating conditions

The card uses PVC with hot-laminated construction. Its dimensions are 85.5 × 54 × 0.9 mm, with a tolerance of ±0.05 mm. Use these measurements when assessing a card holder or storage arrangement for the security office. A physical fit check before employee issue helps the team choose a carrying method that accommodates the card and allows staff to present it at the relevant readers during normal movement through the facility.

Operating temperature is −30°C to 55°C, and operating humidity is 20–80% RH. Compare those limits with the conditions at the intended points of use. For Saudi facilities, include the actual employee route in that assessment, particularly where staff move between different site areas. Keep environmental suitability and reader performance together in the deployment review so that the trial reflects the way the card will be carried and used.

Chip data retention is 5 years. Include this characteristic in credential lifecycle planning alongside the organisation’s own issue and withdrawal procedures. Before rolling out the card, complete a trial with the intended ID and UHF readers, verify identification in the access system and check the permission assignment process. That provides the operations team with a practical basis for employee issue and subsequent card replacement.

Technical Specifications

Brand
ZKTeco
Device Type
ID plus UHF card
Model
DF01 Card

Frequently Asked Questions

Which technologies does the card combine?

It combines 125 kHz ID and UHF, with UHF bands dependent on region.

What reading range applies?

The range is 0–6 m with UHF1-5E/UHF1-5F readers.

What are the card material and dimensions?

Hot-laminated PVC, measuring 85.5 × 54 × 0.9 mm with ±0.05 mm tolerance.

Brand
ZKTeco

Browse ZKTeco access control and time attendance equipment in one place: face and fingerprint terminals, door controllers, card readers, electric locks, hotel locks and vehicle barriers for offices, hotels and compounds across Saudi Arabia. ZKTeco is a Chinese biometrics manufacturer

Browse brand products
Shipping, Warranty and Regulatory

Delivery across Saudi Arabia

Clear warranty

Some devices or frequencies may require a permit or approval depending on the intended use and the regulations in force in the Kingdom. Requirements are clarified before project orders are fulfilled.

Customer Reviews

No ratings yet for this product

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Related Products

ZKTeco

ZKTeco FR1200 Fingerprint and RFID Access Reader

Model ZK-FR1200
Fingerprint and RFIDRS485Biometric reader
320.00 SAR excl. VAT

On backorder

Request a Quote
ZKTeco

ZKTeco QR600-VK QR/RFID Reader with Keypad

Model ZK-QR600-VK
QR codeWiegandQR
495.00 SAR excl. VAT

On backorder

Request a Quote
ZKTeco

ZKTeco ZK-SpeedFace-V5L-MiFare Biometric Access Terminal

Model ZK-SPEEDFACE-V5L-MIFARE
Face1GBTCP
1,245.00 SAR excl. VAT

On backorder

Request a Quote
ZKTeco

ZKTeco SF300 Fingerprint Access Control Terminal

Model ZK-SF300
Fingerprint1TCP
345.00 SAR excl. VAT

On backorder

Request a Quote

7.00 SAR excl. VAT