ZKTeco FR1500WP Flush-Mounted Fingerprint Reader
Flush-mounted fingerprint reader with a SilkID sensor, standard 125 kHz RFID and IP65 protection. Connects through RS-485 and fits a standard single-gang junction box.
320.00 SAR excl. VAT
Available on backorder
RISYS can programme and prepare devices before delivery. Contact us for quantity and project details.
Wholesale and project supply — up to 45% off











Up to 45% off wholesale supply.
Overview
ZKTeco FR1500WP combines fingerprint access with a flush-mounted installation, making the wall preparation part of the reader choice. It uses a SilkID fingerprint sensor, includes standard 125 kHz RFID and carries an IP65 rating. For a Saudi facilities or security manager planning staff entrances, the distinction is practical: the project can specify a recessed reading point while accommodating fingerprint use and a selected card technology. Connection is through RS-485, with support for inBio/inBioPro controllers and standalone fingerprint devices. Choose this model when the installation brief calls for a standard single-gang junction box and the access design needs fingerprint identification at the reading point.
ZKTeco FR1500WP for recessed access points
Flush mounting changes what the building team needs to prepare. The reader fits a standard single-gang junction box, so coordinate that provision with the wall finish and cable route before installation. This is useful during a fit-out, when the electrical contractor and access installer can agree the location together. For a refurbishment, inspect the proposed box position and the available mounting arrangement before the reader is ordered.
Fingerprint use with a defined card choice
The SilkID sensor is the fingerprint interface at the door. For a site introducing fingerprint identification, include the intended user workflow in the commissioning discussion with the integrator. Ask the team to demonstrate fingerprint operation with the connected access equipment at the chosen location. This ties the reader purchase to the way employees will use the entrance, as well as to the mounting work needed behind the finished wall.
Standard RFID operates at 125 kHz. Optional card modes include 125 kHz HID Prox, 13.56 MHz Mifare and HID iClass. These options make card selection an ordering decision. A facilities team with existing credentials should identify the card technology in use and specify the matching reader configuration. Treat each named card option as a configuration to agree with the supplier, and use the actual staff credentials when discussing the intended deployment.
Where the installation approach is useful
Consider the FR1500WP for employee access points in Saudi corporate premises where a recessed reader is part of the fit-out brief. In education or healthcare administration buildings, it can be assessed for departmental entrances that use fingerprint identification. In a commercial development, coordinate its junction box requirement with the contractor responsible for the entrance finishes. These examples depend on the chosen control equipment and access policy; their common requirement is a fingerprint reading point integrated into the wall installation.
Compare protection and system role separately
The FR1500WP and KR100E both carry IP65 ratings, so that shared rating alone will not decide between them. For the FR1500WP, the deciding features are its SilkID fingerprint sensor, flush mounting and supported control equipment. The FR1300 is an indoor slave reader, which gives that model a different deployment focus. Compare the credential workflow and installation method alongside enclosure protection so the specification reflects what staff need to do at the entrance.
Plan the RS-485 connection
Supported equipment includes inBio/inBioPro controllers and standalone fingerprint devices. Identify the exact equipment that will serve the entrance, then have the integrator review the RS-485 connection as part of the design. For an existing installation, this review should happen before the building team closes the wall around the junction box. Bringing the control equipment, reader position and wiring scope into the same discussion helps the trades prepare for the intended arrangement.
During handover, demonstrate the fingerprint workflow and the selected RFID configuration with the equipment used on site. Keep the chosen card option and the reader location in the installation documentation so later replacements can be ordered to the same brief. This model is particularly relevant when procurement must coordinate a biometric reading point, a recessed mounting method and a defined controller connection within the same entrance project.
Technical Specifications
- Brand
- ZKTeco
- IP Rating
- IP65
- Authentication Method
- Fingerprint; 125 kHz RFID standard
- Connectivity
- RS-485
- Device Type
- Flush-mounted fingerprint reader
- Model
- FR1500WP
Frequently Asked Questions
What distinguishes the FR1500WP installation?
It is a flush-mounted reader designed for a standard single-gang junction box and carries an IP65 rating.
Which identification methods are standard?
Fingerprint identification using a SilkID sensor and 125 kHz RFID are standard.
Which optional card technologies can be selected?
Options include 125 kHz HID Prox, 13.56 MHz Mifare and HID iClass. Specify the card option that matches the site credentials.
What equipment can the reader connect to?
It supports inBio/inBioPro controllers and standalone fingerprint devices, using an RS-485 connection.

Browse ZKTeco access control and time attendance equipment in one place: face and fingerprint terminals, door controllers, card readers, electric locks, hotel locks and vehicle barriers for offices, hotels and compounds across Saudi Arabia. ZKTeco is a Chinese biometrics manufacturer
Browse brand productsDelivery across Saudi Arabia
Clear warranty
Some devices or frequencies may require a permit or approval depending on the intended use and the regulations in force in the Kingdom. Requirements are clarified before project orders are fulfilled.
Customer Reviews
No ratings yet for this product
Only logged in customers who have purchased this product may leave a review.
Related Products
ZKTeco ZK-InBio260Pro Two-Door Biometric Access Panel
On backorder
ZKTeco ZK-InBio460Pro Four-Door Biometric Access Panel
On backorder
ZKTeco F18 Fingerprint Access Control Reader
On backorder
ZKTeco ZK-WRF100 MF Wireless Mifare Access Reader
On backorder







Reviews
There are no reviews yet.