ZKTeco TLEB101 Touchless Exit Button, SUS304 Stainless
An infrared touchless exit button that releases the door when a hand comes within 2 – 10cm of the sensor, housed in SUS304 stainless steel and rated DC 9 ~ 16V, 2A.
Price on request
Available on backorder
RISYS can programme and prepare devices before delivery. Contact us for quantity and project details.
Wholesale and project supply — up to 45% off











Up to 45% off wholesale supply.
Overview
The ZKTeco TLEB101 is a touchless exit button that releases a controlled door when a hand passes in front of its infrared sensor, so staff leave a secured area without pressing anything. Within ZKTeco’s exit-button family it is the balanced, core choice: a SUS304 stainless steel shell, a deliberately short 2 – 10cm detection window, and switching rated at DC 9 ~ 16V with a 2A rated current, which suits the low-voltage lock and controller circuits found on most access-controlled doors. It does not add extras such as a handheld remote; it concentrates on the one job of a request-to-exit device and does it consistently, in a housing that tolerates heavy daily use and frequent cleaning. For buyers specifying many doors at once, that combination makes it a sensible baseline that still steps above a plastic push button.
How the ZKTeco TLEB101 works in practice
In use, the TLEB101 behaves like a conventional exit switch whose contact is triggered by proximity instead of pressure. The infrared sensor watches a zone between 2cm and 10cm from its face; a palm brought into that zone changes the switch state, and the access controller or lock circuit wired to it releases the door.
Because the zone is short, someone walking past in a corridor, a trolley rolling by, or a person standing near the door while talking is unlikely to set it off. The user has to make a deliberate gesture close to the plate, which keeps unintended releases low on doors that open onto public corridors or lobbies.
The touch-free action also matters for hygiene. Exit buttons are among the most handled surfaces in any building, and a sensor that never needs contact removes one shared touchpoint from every controlled door. The SUS304 stainless steel shell resists corrosion and keeps its finish when wiped with the disinfectants used in clinics and food facilities, so the plate still looks presentable after years on a busy wall.
Electrically, the switch is rated for DC 9 ~ 16V with a 2A rated current. That window spans the supply levels commonly used by access controllers and electric locks. The current rating describes the load the switch contacts are designed to handle, which an installer should check against the lock if the button is wired into the lock’s power line rather than to a controller input.
Where it fits in Saudi facilities
Hospitals and clinics across the Kingdom are a natural fit: wards, pharmacies, sterile stores and staff-only corridors all need controlled doors that staff can exit with clean or gloved hands. Food production plants and catering kitchens share the same concern, and the stainless shell suits areas that are washed down regularly. In corporate offices and government buildings, the TLEB101 gives a clean, uniform exit point on server rooms, records rooms and executive floors where a card or fingerprint reader controls entry. Schools and universities can use it on administration offices and laboratories, and back-of-house areas in shopping malls benefit from an exit device that is quick to use when staff have their hands full of stock.
The operating range of -20°C ~ +50°C with 10% – 90% humidity covers air-conditioned interiors comfortably, along with most sheltered locations. Exit buttons sit on the secure side of the door, which in most buildings is indoors, so temperature is rarely a constraint; where a door does face direct summer sun, mount the button on the shaded side or inside the conditioned space, since surface temperatures there can climb past the upper limit.
Choosing between the TLEB101, TLEB102 and TLEB101-R
The TLEB101 and the TLEB102 share the same published ratings: both switch at DC 9 ~ 16V with a 2A rated current, both sense at 2 – 10cm, both run from -20°C ~ +50°C, and both use a SUS304 stainless steel shell. The decision between those two is therefore not an electrical one; it comes down to the housing that best suits your door frames, which our team can confirm before you order.
The TLEB101-R is the step up for doors that need more than a hand-wave exit. The TLEB101-R adds release from a handheld remote key, a wider infrared detection window that picks up a hand from further away, and a published rating for cycles between failures. Choose that model for a reception or security desk that has to open a door without walking over to it; choose the TLEB101 where staff simply need a dependable, contact-free way out and the shorter sensing window is an advantage rather than a limitation.
Installation notes
Plan the TLEB101 as part of the door’s access-control circuit: run a cable from the button to the controller’s exit input or to the lock circuit, and supply it within DC 9 ~ 16V. Mount it at a comfortable hand height on the secure side of the door, and keep the 2 – 10cm sensing zone clear of fixed objects such as a door stop, signage or the edge of cable trunking, so that only a hand enters it. After wiring, test the release from several hand angles so users learn the gesture, and confirm that the door relocks once the hand is withdrawn.
Technical Specifications
- Brand
- ZKTeco
- Device Type
- Infrared sensor door switch (touchless exit button)
- Model
- TLEB101
Frequently Asked Questions
At what distance does the TLEB101 detect a hand?
It detects a palm at 2 - 10cm from its face. The short window means people walking past the door are unlikely to trigger a release.
What voltage does the TLEB101 work on?
It is rated for DC 9 ~ 16V with a 2A rated current, a range that covers the supply levels common to access controllers and electric locks.
Is it suitable for areas that are disinfected often?
Yes. It needs no contact at all, and its SUS304 stainless steel shell resists corrosion, which suits hospitals, clinics and food facilities.
How does the TLEB101 differ from the TLEB101-R?
The TLEB101-R adds release from a handheld remote key and a wider detection window, while the TLEB101 relies on its sensor alone at 2 - 10cm.

Browse ZKTeco access control and time attendance equipment in one place: face and fingerprint terminals, door controllers, card readers, electric locks, hotel locks and vehicle barriers for offices, hotels and compounds across Saudi Arabia. ZKTeco is a Chinese biometrics manufacturer
Browse brand productsDelivery across Saudi Arabia
Clear warranty
Some devices or frequencies may require a permit or approval depending on the intended use and the regulations in force in the Kingdom. Requirements are clarified before project orders are fulfilled.
Customer Reviews
No ratings yet for this product
Only logged in customers who have purchased this product may leave a review.
Related Products
ZKTeco FR1200 Fingerprint and RFID Access Reader
On backorder
ZKTeco QR600-VK QR/RFID Reader with Keypad
On backorder
ZKTeco SenseFace 2A WiFi Biometric Access Control Terminal
On backorder
ZKTeco ZK-SpeedFace-V5L-MiFare Biometric Access Terminal
On backorder





Reviews
There are no reviews yet.