ZKTeco ZK-InBio160Pro Biometric Access Control Panel
Single-door biometric access panel supporting 60,000 card holders, 20,000 fingerprints and 100,000 event records. It combines TCP/IP and RS-485 connectivity with four reader interfaces, three inputs and two outputs.
1,370.00 SAR excl. VAT
Available on backorder
RISYS can programme and prepare devices before delivery. Contact us for quantity and project details.
Wholesale and project supply — up to 45% off











Up to 45% off wholesale supply.
Overview
ZKTeco InBio-160 Pro suits an access project where a single controlled entrance must accommodate a substantial credential population. It supports fingerprint and card authentication, with capacity for 60,000 card holders and 20,000 fingerprints. This makes user enrolment a central part of the selection decision, rather than choosing a panel solely by the number of doors. A shared staff access point at a Saudi corporate campus or a busy administration entrance can be assessed against those limits. TCP/IP and RS-485 cover the panel’s connectivity, and its reader interfaces give the installer a defined basis for planning the doorway. The Pro model’s position is therefore about matching a concentrated access requirement to larger credential storage within a focused door-control scope.
ZKTeco InBio-160 Pro and credential scale
The panel controls one door. Its 60,000-card-holder limit and 20,000-fingerprint limit describe separate enrolment capacities, each relevant to a different credential plan. A business issuing staff badges should compare its card holder population with the card limit. A site introducing fingerprint access should separately assess how many fingerprints it intends to enrol. Those checks are useful even when everyone passes through the same entrance, because physical door coverage and credential population measure different parts of an access project.
Fingerprint and card authentication allow the project team to consider both credential approaches. For an office operator, that can mean reviewing the established badge routine alongside a proposed biometric enrolment process. Decide which users need which method before choosing the readers. This keeps the access design aligned with the organisation’s routine, rather than letting a reader purchase determine how the whole workforce must use the entrance. Confirm the planned readers and their connection requirements with the installation contractor.
Doorway connections and electrical planning
There are four reader interfaces, comprising two RS-485 and two Wiegand connections. Map the reader layout against this interface distribution during the design review. The available connections are relevant to reader selection and cable planning; they do not change the panel’s single-door coverage. A facilities manager can use this distinction when checking a contractor’s equipment schedule, especially where the schedule lists multiple reader positions around the same controlled access point.
The panel has three inputs and two outputs. Include those counts in the electrical layout and ask the contractor to map the proposed connections to the panel’s input and output arrangement. Review that mapping before equipment is ordered, so the project has a coordinated wiring plan. Treat reader interfaces, inputs and outputs as separate parts of the design: having the right reader interface does not by itself establish how the other doorway connections will be arranged.
The supply range is 9.6–14.4V DC. Electrical planning should select a supply within that range and coordinate its connection with the rest of the doorway equipment. Give the electrical contractor the panel’s voltage requirement alongside the connection schedule. This helps procurement assess the panel as part of a working installation, rather than treating the controller purchase as the entire access system. Check the proposed supply arrangement during the installation review before commissioning.
Network choice and daily operation
TCP/IP and RS-485 provide the connection choices for this panel. Discuss the intended route with the site’s technology team, taking account of where the controller and access equipment will sit. Record the selected link in the project drawings and handover material. A clear connection plan gives maintenance staff a practical reference when tracing the access installation, while procurement can coordinate the panel and reader requirements with the planned wiring work.
The event log holds 100,000 records. Use this as an event-storage figure when planning access-history review; the period represented depends on activity at the entrance. At a busy corporate site, agree who reviews access events and who maintains enrolments when employee assignments change. These operational responsibilities belong alongside the hardware plan, because the credential population and the event history are distinct parts of managing an access point.
Choosing between coverage and enrolment capacity
Compared with InBio160, InBio-160 Pro gives the buyer greater credential capacity for a similarly focused doorway requirement. InBio260 instead broadens door coverage, making it relevant when the project extends beyond a single access point. Choose this Pro panel when the card and fingerprint population drives the requirement. For a Saudi employer concentrating many users at a shared entrance, assess the roster, reader layout and electrical connections together before approving the model.
Technical Specifications
- Brand
- ZKTeco
- Authentication Method
- Fingerprint and card
- Capacity
- 60,000 card holders; 20,000 fingerprints; 100,000 event records
- Connectivity
- TCP/IP and RS-485
- Device Type
- Biometric Access Control Panel
- Model
- ZK-InBio160Pro
- Power
- 9.6–14.4V DC
Frequently Asked Questions
What is the main difference from InBio160?
InBio-160 Pro offers a higher card holder and fingerprint capacity, while both panels control one door.
How many credentials and events can the panel store?
Capacity is 60,000 card holders, 20,000 fingerprints and 100,000 event records.
Which connections and reader interfaces does it offer?
Connectivity is TCP/IP and RS-485. The four reader interfaces comprise two RS-485 and two Wiegand connections.
What are the supply and input/output requirements?
The supply range is 9.6–14.4V DC. The panel has three inputs and two outputs.

Browse ZKTeco access control and time attendance equipment in one place: face and fingerprint terminals, door controllers, card readers, electric locks, hotel locks and vehicle barriers for offices, hotels and compounds across Saudi Arabia. ZKTeco is a Chinese biometrics manufacturer
Browse brand productsDelivery across Saudi Arabia
Clear warranty
Some devices or frequencies may require a permit or approval depending on the intended use and the regulations in force in the Kingdom. Requirements are clarified before project orders are fulfilled.
Customer Reviews
No ratings yet for this product
Only logged in customers who have purchased this product may leave a review.
Related Products
ZKTeco ZK-WRF100 MF Wireless Mifare Access Reader
On backorder
ZKTeco FR1200 Fingerprint and RFID Access Reader
On backorder
ZKTeco QR600-VK QR/RFID Reader with Keypad
On backorder
ZKTeco ZK-InBio260Pro Two-Door Biometric Access Panel
On backorder





Reviews
There are no reviews yet.