ZKTeco ZK-KR300-MF Dual-Frequency Card Reader IP65
Dual-frequency ID/MiFare reader with 26-bit EM and 34-bit MF output, a two-color LED and IP65 protection. Operates from DC 6–14V with a maximum current of 70mA.
47.50 SAR excl. VAT
Available on backorder
RISYS can programme and prepare devices before delivery. Contact us for quantity and project details.
Wholesale and project supply — up to 45% off











Up to 45% off wholesale supply.
Overview
ZKTeco KR300-MF brings ID/MiFare card reading into an access installation with a defined DC supply requirement and distinct output formats for EM and MF credentials. Its DC 6–14V operating range and maximum current of 70mA give the installer concrete values for planning the reader supply. For a facilities buyer, that makes electrical matching part of the decision from the start, alongside the cards employees carry and the format the controller receives. The dual-frequency reader also has a two-color LED and IP65 protection. Consider it when the project calls for ID/MiFare operation, then have the contractor review credential handling, controller input and power delivery as a connected installation.
ZKTeco KR300-MF and supply planning
The power input is DC 6–14V, with maximum current stated as 70mA. Give those values to the contractor preparing the reader circuit, and ask them to verify the supply at the proposed installation position. The purchasing question is whether the planned circuit can deliver the reader’s required supply under the actual installation conditions. Keep that check attached to the reader choice when evaluating replacements or adding another access point to an existing building.
In a project covering several entrances, include each reader in the contractor’s supply assessment. Reader demand should be considered alongside the equipment sharing the proposed power arrangement. This makes the electrical review useful to both procurement and installation teams: procurement can specify the intended reader clearly, while the installer can assess the circuit before fixing the hardware in place.
Credential types and output formats
The reader supports ID/MiFare authentication, with 26-bit output for EM and 34-bit output for MF. These formats matter when choosing the receiving controller and planning credential enrolment. Ask the integrator to check the applicable format for the actual cards used at the site. A working card presentation should lead to the intended credential being received by the access system, so include that end-to-end check in the acceptance process.
For a Saudi corporate office reviewing employee cards, this model offers a way to evaluate ID/MiFare reading within the proposed access design. In a warehouse administration area or a contractor entrance, the same selection starts with the credentials people will present. Identify the card population first, then confirm how the controller handles the corresponding output. This prevents the reader decision from becoming separated from the credential plan.
Indication and placement
A two-color LED provides a visible indication at the reader. During handover, have the contractor demonstrate its behavior while presenting the site’s credentials. Position the reader so users can see the indication as they approach the access point. This is particularly useful where employees may be unfamiliar with the building or where the access reader sits near other door equipment.
IP65 protection is another selection factor when assessing the proposed location. Review the environmental demands at that point and assess the complete installation, including surrounding connections. The reader’s enclosure rating belongs in the location decision alongside credential format and power delivery. For a service entrance or an operational access point, bring the facilities team into that review so placement supports the way staff actually move through the area.
Comparing family options before ordering
The KR102E sibling also carries IP65, so enclosure rating alone does not distinguish these readers. For the KR300-MF, base the evaluation on its own ID/MiFare operation, EM and MF output formats, supply range and LED indication. Where environmental protection is the main driver, KR500H-HID carries IP67; that sibling comparison still needs to be considered with the credential requirements of the project.
Before approving the reader for wider rollout, ask for a demonstration using the intended cards, the planned controller and the selected supply. Check that the credential reaches the system as expected and that users can observe the LED. These practical checks turn the product choice into a reviewable installation decision for the security manager and the team responsible for maintaining the building.
Technical Specifications
- Brand
- ZKTeco
- IP Rating
- IP65
- Authentication Method
- ID/MiFare
- Connectivity
- 26-bit (EM), 34-bit (MF) output
- Device Type
- Dual-frequency reader
- Model
- ZK-KR300-MF
- Power
- DC 6–14V, max 70mA
Frequently Asked Questions
Which card types are supported?
The KR300-MF supports ID/MiFare card authentication as a dual-frequency reader.
What output formats does it provide?
It provides 26-bit output for EM and 34-bit output for MF.
What power supply does it need?
It operates from DC 6–14V and has a maximum current of 70mA.
What protection and indication does it offer?
It has IP65 protection and a two-color LED.

Browse ZKTeco access control and time attendance equipment in one place: face and fingerprint terminals, door controllers, card readers, electric locks, hotel locks and vehicle barriers for offices, hotels and compounds across Saudi Arabia. ZKTeco is a Chinese biometrics manufacturer
Browse brand productsDelivery across Saudi Arabia
Clear warranty
Some devices or frequencies may require a permit or approval depending on the intended use and the regulations in force in the Kingdom. Requirements are clarified before project orders are fulfilled.
Customer Reviews
No ratings yet for this product
Only logged in customers who have purchased this product may leave a review.
Related Products
ZKTeco ZK-inPulse Finger Vein Access Control Terminal
On backorder
ZKTeco ZK-SF200 Fingerprint Attendance and Access Terminal
On backorder
ZKTeco ZK-WRF100 MF Wireless Mifare Access Reader
On backorder
ZKTeco ZK-SC503 RFID Standalone Access Control Terminal
On backorder





Reviews
There are no reviews yet.