Opens in a new tab
Wholesale & retail - B2B/B2C
Free site survey in Riyadh
Shipping across the Kingdom
Warranty on all products
BrandZKTeco

ZKTeco ZK-MR1010 Metal RFID Card Reader IP66

Metal access reader with IP66 protection and IK10 impact resistance, using 125 kHz RFID credentials. Supports Wiegand 26/34 bits and a 9–24 V DC supply.

IK RatingIK10IP RatingIP66Authentication Method125 kHz RFIDConnectivityWiegand 26/34 bitsDevice TypeMetal access control readerModelZK-MR1010

140.00 SAR excl. VAT

Available on backorder

WhatsApp Inquiry

RISYS can programme and prepare devices before delivery. Contact us for quantity and project details.

Wholesale and project supply — up to 45% off

Minimum order30 units

Shipping and delivery icon
Fast shipping
SMSA Express logoFedEx logoNAQEL Express logoDHL logo
Product warranty icon
Genuine warranty
All products carry a one-year authorised-agent warranty.
Secure payment icon
Secure payment
madaVisaMastercardApple Pay
B2B sales icon
B2B/B2C supply

Up to 45% off wholesale supply.

Overview

ZKTeco MR1010 places enclosure protection at the centre of reader selection. This metal access control reader carries IP66 protection and an IK10 impact rating, a combination to assess when the physical conditions at the entrance drive the specification. It reads 125 kHz RFID credentials and supports Wiegand 26/34 bits, so protection requirements can be considered alongside the card system and controller connection. The electrical requirement is 9–24 V DC with current consumption no greater than 50 mA, and its reading distance is 2–6 cm. For Saudi operations and security managers, the relevant question is whether the intended doorway needs this combination of metal construction, protection ratings and credential reading, with the supply and controller matched to the installation.

ZKTeco MR1010 for protected reader locations

The metal body and impact rating give facilities teams concrete features to assess at busy entrances. Where staff movement, deliveries or service activity bring people and equipment near the reader, review its proposed location as part of the doorway layout. Mounting placement should allow comfortable card presentation while keeping the reader clear of routine equipment movement. Physical protection and sensible positioning work together when specifying a reader for a working environment.

Include the enclosure requirements in the site survey rather than selecting every reader solely by credential type. A staff entrance beside a service route may have different physical demands from an internal office doorway. MR1010 is worth considering when its protection profile matches the planned location. Discuss the mounting surface and cable route with the installer, and include future access for service when deciding where the reader belongs.

Credential presentation and controller matching

The RFID frequency is an essential credential selection detail. A facility keeping existing cards should test an issued credential with the proposed arrangement before buying readers for more entrances. For a new project, choose the cards, reader and controller configuration together. This avoids treating similar looking access cards as interchangeable. The reader belongs in a defined credential path, where the security team knows which cards employees will carry and the integration team knows which input receives them.

Its close reading distance also shapes the user interaction. Review the approach to the door and place the reader where an employee can present a card directly near it. During the doorway assessment, try the movement from the direction people normally arrive. In an operations building, include anyone who uses the entrance while carrying work materials. That practical review helps turn the specified reading distance into a usable presentation point.

Saudi sector applications

A warehouse staff entrance is a possible application when the project calls for RFID access and the reader’s metal construction and protection ratings. The facilities manager can assess the enclosure alongside the flow of workers and nearby service activity. In an industrial administration building, the same assessment can distinguish service entrances from quieter internal doors. Assign the reader according to the needs of each location rather than assuming every access point requires the same enclosure.

Education and service facilities can also evaluate MR1010 where protection of the reader body matters to the installation. Keep the hardware selection connected to the access policy: the device reads the credential, while the site’s access control configuration manages the intended permissions. Discuss the entrance role with operations staff and the interface with the integration team. This gives procurement a practical reason for choosing the model at a particular doorway.

How it differs within the family

KR100E carries an IP65 rating, while KR500H-HID carries IP67. MR1010’s own selection combines its environmental protection rating with metal construction and impact resistance. Compare those requirements separately from credential choice and controller format. A protection rating attached to another reader does not describe the whole family. Assess MR1010 as its own device, with the combination of enclosure, RFID reading and electrical requirements needed at the proposed entrance.

Electrical and integration planning

The supply range gives the installation team a defined requirement to check against the proposed power arrangement. Confirm the voltage at the reader position and include its current demand in the project’s supply calculation. For the Wiegand connection, agree the output format with the controller team and verify the match during commissioning. A common interface name should lead to a configuration check before the reader is repeated across more doors.

Bring the card trial, electrical review and physical placement assessment together at the intended entrance. This is useful for replacing an existing reader as well as specifying a new building. Choose MR1010 where its protected metal enclosure serves the location, and complete the selection by matching the RFID credentials, Wiegand input and supply to the access project.

Technical Specifications

Brand
ZKTeco
IK Rating
IK10
IP Rating
IP66
Authentication Method
125 kHz RFID
Connectivity
Wiegand 26/34 bits
Device Type
Metal access control reader
Model
ZK-MR1010
Power
9–24V DC; current ≤50mA

Frequently Asked Questions

What protection ratings does MR1010 have?

Its metal reader construction carries IP66 protection and IK10 impact resistance.

What credentials and reading distance does it support?

It reads 125 kHz RFID credentials at a reading distance of 2–6 cm.

What supply does it require?

It operates on 9–24 V DC with current consumption no greater than 50 mA.

Which reader output formats are supported?

MR1010 supports Wiegand 26/34 bits. Match the selected format to the controller configuration.

Brand
ZKTeco

Browse ZKTeco access control and time attendance equipment in one place: face and fingerprint terminals, door controllers, card readers, electric locks, hotel locks and vehicle barriers for offices, hotels and compounds across Saudi Arabia. ZKTeco is a Chinese biometrics manufacturer

Browse brand products
Shipping, Warranty and Regulatory

Delivery across Saudi Arabia

Clear warranty

Some devices or frequencies may require a permit or approval depending on the intended use and the regulations in force in the Kingdom. Requirements are clarified before project orders are fulfilled.

Customer Reviews

No ratings yet for this product

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Related Products

ZKTeco

ZKTeco ZK-InBio260Pro Two-Door Biometric Access Panel

Model ZK-INBIO260PRO
Fingerprint and card60TCP
1,720.00 SAR excl. VAT

On backorder

Request a Quote
ZKTeco

ZKTeco SF300 Fingerprint Access Control Terminal

Model ZK-SF300
Fingerprint1TCP
345.00 SAR excl. VAT

On backorder

Request a Quote
ZKTeco

ZKTeco ZK-InBio160Pro Biometric Access Control Panel

Model ZK-INBIO160PRO
Fingerprint and card60TCP
1,370.00 SAR excl. VAT

On backorder

Request a Quote
ZKTeco

ZKTeco FR1200 Fingerprint and RFID Access Reader

Model ZK-FR1200
Fingerprint and RFIDRS485Biometric reader
320.00 SAR excl. VAT

On backorder

Request a Quote

140.00 SAR excl. VAT