Wholesale & retail - B2B/B2C
Free site survey in Riyadh
Shipping across the Kingdom
Warranty on all products
BrandAPC

APC PDM3532IEC-500 Power Distribution Module, 500 cm

A mid-length APC power distribution module: a 500 cm cable carrying a 400 V three-phase, 32 A circuit to the rack, terminated in one IEC 309 32 A outlet.

ModelPDM3532IEC-500Power400 V 3 PHASES

Original price was: 2,875.46 SAR.Current price is: 2,702.93 SAR. excl. VAT

Available on backorder

WhatsApp Inquiry

RISYS can programme and prepare devices before delivery. Contact us for quantity and project details.

Wholesale and project supply — up to 45% off

Minimum order5 units

Shipping and delivery icon
Fast shipping
SMSA Express logoFedEx logoNAQEL Express logoDHL logo
Product warranty icon
Genuine warranty
All products carry a one-year authorised-agent warranty.
Secure payment icon
Secure payment
madaVisaMastercardApple Pay
B2B sales icon
B2B/B2C supply

Up to 45% off wholesale supply.

Overview

When a rack stands a few positions down the row from its distribution panel, the cable has to cover the extra distance without leaving a heavy coil behind. The APC PDM3532IEC-500 answers that case with a 500 cm lead, which places it in the middle of the three lengths offered here. It is a three-phase power distribution module for a 400 V supply, rated for a maximum line current and a maximum current draw of 32 A and protected by a 32 A breaker, and it hands that circuit to the rack through one IEC 309 32 A outlet. Output is listed at 230 V and at 400 V three-phase on a 50 Hz rating. In practice it is the length to reach for when the shorter lead falls just short and the longest would leave cable to spare. The assembly is grey and marked CE and VDE.

What the APC PDM3532IEC-500 does on site

Think of the module as a prefabricated branch circuit. Instead of a separate breaker, a length of site-run cable and an industrial socket fitted by hand, the protection, the conductor run and the termination arrive as one product. For a contractor fitting out a data hall, that turns a craft job into a repeatable one: each rack gets the same circuit, installed the same way and documented under the same model number.

The rack end carries a single IEC 309 32 A outlet. Whatever it feeds, usually a rack PDU, must present a matching IEC 309 32 A plug. Because these industrial connectors are keyed, a mismatched plug cannot be forced in, which protects equipment during moves and additions when several teams are working in the same room.

On the supply side the module works at 400 V across three phases, with each line carrying up to 32 A. A three-phase feed lets one rack support a dense load such as virtualisation hosts and storage arrays. The 32 A breaker is the boundary: the combined draw of everything behind the module has to stay within it, and planning loads phase by phase keeps each line inside that rating.

Saudi sites that call for the 500 cm lead

Mid-sized data halls are where this length earns its place: colocation suites in Riyadh and Dammam, the primary and recovery data centres of insurers and finance companies, and the computer rooms of large hospital groups, where racks stand in rows of moderate length fed from a single panel. In these rooms the second or third cabinet down from the panel is often out of reach of the shortest lead.

The same holds for telecom and broadcast facilities, whose equipment rooms grow rack by rack, and for municipal and ministry sites consolidating servers from several buildings into one room. For contractors on giga-project and new-city infrastructure, a standard mid-length module also simplifies stocking, since one model can serve many positions along a row while the shorter and longer lengths are kept for its ends.

PDM3532IEC-500 among the PDM3532IEC lengths

Electrically, the PDM3532IEC-440 and PDM3532IEC-560 are the same module as this one; only the cable differs, with the PDM3532IEC-440 a little shorter and the PDM3532IEC-560 a little longer. The comparison is therefore about distance, not capacity.

Selecting by measurement rather than by habit pays off. Too short, and the module will only reach by being pulled tight over tray edges; too long, and the spare cable ends up coiled where it blocks airflow and gets in the way of the next installation. When a measured route lands between the shorter and the longer option, the PDM3532IEC-500 is the balanced choice.

Before you install the APC PDM3532IEC-500

Confirm three things on the drawings first. The source must be a 400 V three-phase supply, protected upstream as the electrical engineer specifies. The equipment at the rack must take an IEC 309 32 A plug of matching configuration. And the module’s 50 Hz rating should be checked against the frequency of the supply that will feed it.

Then walk the route with a tape measure: from the panel, along the tray or under the floor, up into the cabinet and across to the point where the rack PDU plugs in. An installation guide is included with the module, the warranty runs for 12 months, and the CE and VDE marks can be cited in consultant submittals.

Package Contents

  • Installation guide

Technical Specifications

Brand
APC
Warranty
1 Year
Model
PDM3532IEC-500
Power
400 V 3 PHASES

Frequently Asked Questions

Why choose the APC PDM3532IEC-500 over the PDM3532IEC-440?

Choose it when the rack sits further from the source than the PDM3532IEC-440 can reach comfortably. The two are electrically identical, and this model simply has the longer cable. Its own lead is 500 cm.

How much current does it handle?

Its maximum line current and maximum current draw are both 32 A on a 400 V three-phase supply, protected by a 32 A breaker.

What voltage is available at the outlet?

Output is listed at 230 V and at 400 V three-phase, delivered through one IEC 309 32 A outlet.

What comes in the box?

An installation guide. The module is grey, carries CE and VDE marks and has a 12-month warranty.

Brand
APC

APC UPS systems keep servers and network cabinets running through outages and unstable mains, and the wider APC range extends into the racks, power distribution and sensors around them. APC began in the United States as American Power Conversion and

Browse brand products
Shipping, Warranty and Regulatory

Delivery across Saudi Arabia

Clear warranty

Some devices or frequencies may require a permit or approval depending on the intended use and the regulations in force in the Kingdom. Requirements are clarified before project orders are fulfilled.

Customer Reviews

No ratings yet for this product

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Related Products

APC

APC AP8886 Metered Rack PDU, 32A Three-Phase 400V

Model AP8886
2 YearsRack-mounted32 A
Original price was: 9,311.73 SAR.Current price is: 8,753.03 SAR. excl. VAT Save 558.70 SAR

On backorder

Request a Quote
APC

APC AP8958EU3 0U Rack PDU 16A 230V with IEC309 Cord

Model AP8958EU3
0U7 IEC-320-C13 and 1 I...230V
Original price was: 5,350.86 SAR.Current price is: 5,029.81 SAR. excl. VAT Save 321.05 SAR

On backorder

Request a Quote
APC

APC AP6120A Rack PDU, 7 C13 + 2 C19 Outlets, 20A Input

Model AP6120A
240V
Original price was: 450.07 SAR.Current price is: 423.07 SAR. excl. VAT Save 27.00 SAR

On backorder

Request a Quote
APC

APC AP6032A Rack PDU, 4 C19 Outlets, 32A IEC 60309 Input

Model AP6032A
230V
Original price was: 850.14 SAR.Current price is: 799.13 SAR. excl. VAT Save 51.01 SAR

On backorder

Request a Quote

Original price was: 2,875.46 SAR.Current price is: 2,702.93 SAR. excl. VAT